Home · About · Geotechnical contractor
Fen Zemin & İnşaat: Geotechnical Contractor in Istanbul
Fen Zemin & İnşaat is a geotechnical contractor based in Ümraniye, Istanbul. We were founded in 2023, and our founder, Abdullah Çetintaş, has worked on ground and foundation sites since 2006. Our own crews and rigs carry out bored piling, ground anchors and jet grouting.

Founded
2023
Office
Ümraniye, Istanbul
Founder
Abdullah Çetintaş, Geological Engineer
On site
Our founder since 2006
Capacity
Piles up to Ø2000 mm and 70 m
Region
Türkiye and Central Asia
What kind of geotechnical contractor is Fen Zemin & İnşaat?
Our registered name is Fenzemin İnşaat Mühendislik Taahhüt Sanayi ve Ticaret Limited Şirketi. On site and online, however, we use the name Fen Zemin & İnşaat. Our slogan also sums up our work: The Trusted Brand for Solid Foundations.
In short, ground and foundations sit at the centre of our work. For example, our own crews and rigs carry out bored piles, ground anchors, micropiles, soil nailing, shotcrete and jet grouting. By contrast, we run site investigation, geotechnical testing and design with specialist partners.
We carry loads to a firm layer with bored piles, CFA piles and micropiles.
We hold the ground and neighbouring buildings with anchored walls in deep excavations.
We strengthen weak ground with jet grouting, DSM and grouting.
We also take on urban regeneration and turnkey building work.
Our team
That is why two engineers who know the site make the engineering decisions. The size of our site crew, on the other hand, depends on the scope of each job.
Abdullah Çetintaş · Founder and General Manager
Geological engineer with an MBA (taught in English) and a Class B occupational health and safety specialist certificate. In the industry since 2006; general manager of a ground engineering firm from 2014 to 2022. LinkedIn
Ömer Faruk Çetintaş · Project Manager
Civil and mechanical engineer (Selçuk University) with more than 15 years of experience in ground, infrastructure and building works in Türkiye and abroad. LinkedIn
Our projects as a geotechnical contractor
Since we were founded, we have built shoring, piles and ground improvement in Istanbul and Uzbekistan. We also completed an urban regeneration building in Avcılar.

Aydın University Annex Building
200 bored piles of Ø80 cm (6,000 m) and 800 anchors (30,000 m); a deep excavation in clay.

Secant bored piles and jet grouting; the foundation about 4 m below sea level stayed dry.

Tashkent residential and commercial projects
About 10,000 m of anchors across four projects.

Avcılar urban regeneration housing
An 18-flat residential building under the flat-for-land model; complete.
Our clients include Aydın University, Eren Holding and Sam İnşaat. In Karaköy, for example, we worked with our client Sam İnşaat as a true solution partner.
By contrast, we show the projects from our founder’s earlier roles in a separate section. Among them, for example, are 300,000 m of jet grouting at Ashgabat Airport and 30,000 m of bored piles at the Yenikapı Event Area. See our founder’s earlier projects.
How do we work as a geotechnical contractor?
Every job starts the same way: first we understand the ground, then we choose the method. After all, the same method does not give the same result on every site.
- Site investigation first: We never propose a method before reading the borehole logs.
- Our own equipment: For piling, anchoring and jet grouting we never wait for another firm’s rig.
- Records: We record the length, materials and test results of every pile, anchor and column.
- Clear quotes: Our quotes show drilling, materials, testing and mobilisation on separate lines.
- Partners: We run investigation, testing and design with specialist firms and link the results to site.
- Safety: Our founder holds a safety specialist certificate, and we treat site safety as part of the job.
The rule we never break on site: always place bored pile concrete with a tremie pipe. We explain why on our bored piles page.
What do the engineers we have worked with say?
The two comments below come from engineers who worked on the same projects as our founder while at different companies. Both comments are also public on LinkedIn.
“We worked together with Abdullah Çetintaş on the ground improvement and jet grouting works of Çalık Enerji’s Navoi-2 and Turakurgan projects in Uzbekistan. He has strong technical knowledge in geotechnical engineering and ground improvement, and he truly puts safety and quality into practice on site.”
Gökhan Küçük, Project Manager (shortened from the original recommendation)
“A manager I was glad to work with for his character, leadership and professional competence, and whose advice in his field I will always need.”
Gürbüz Uzun, Civil Engineer (translated from Turkish)
You can read the full recommendations on our founder’s LinkedIn profile.
Why does equipment matter for a geotechnical contractor?
Because in ground works, the equipment often sets the programme. That is why we keep the rigs for our core work in our own fleet.
- Sany SR285R and Jintai SD28W bored piling rigs
- Sany SCC600E crawler crane (60 tonnes)
- Casagrande C6 and Soilmec SM14 anchor and micropile rigs
- Tecniwell TW400 jet grouting pump and TWM20 mixer
You can find model years and what we use each rig for on our equipment fleet page.
Where do we work?
Our office is in Ümraniye, Istanbul. However, we work in every province of Türkiye and have also completed work in Tashkent, the capital of Uzbekistan. In earlier roles, our founder also worked on large projects in Turkmenistan and Uzbekistan.
Thanks to this experience, we also take on projects in Central Asia. For example, on distant sites we settle the rig, crew and spare parts plan before work starts.
Frequently asked questions about Fen Zemin & İnşaat
We have collected the questions we receive most often about our company. However, if yours is not here, call us or write through the quote form.
About the company
When was Fen Zemin & İnşaat founded?
We were founded in 2023. Our founder, Abdullah Çetintaş, has worked on ground and foundation sites since 2006.
What does Fen Zemin & İnşaat do?
We carry out bored piles, CFA piles, micropiles, ground anchors, soil nailing, shotcrete, jet grouting, DSM, grouting and dynamic compaction. We also take on urban regeneration and turnkey construction.
Which work do you do yourselves?
Our own crews and rigs carry out piling, shoring and ground improvement. By contrast, we run site investigation, testing and design with specialist partners.
Where is your office?
Our office is at Necip Fazıl Mah. 19 Mayıs Cad. No:3L D:14, 34773 Ümraniye, Istanbul. However, our team is often on site, so please call before visiting.
How we work
Where do you work?
We work in every province of Türkiye. In addition, we have completed work in Uzbekistan and also take on projects in Central Asia.
Why don’t you publish prices?
Because the cost of the same work varies a great deal with the ground, the quantities and the site. That is why we quote from the quantities.
What should I send for a quote?
Generally, the site investigation report, any design and the site address are enough. Write to us even if documents are missing; we make an initial assessment and fill the gaps together.
Contact us about your project
Send us your site investigation and design. Then let us prepare the right method and a quantity-based quote together.

